Forum   Contacts   RSS
AtomInfo.Ru


The main construction and installation works are completed at Rooppur NPP (Bangladesh)

Rosatom, PUBLISHED 18.12.2024

The construction and installation works are completed at Unit 1 of Rooppur NPP being constructed by the Engineering Division of State Atomic Energy Corporation Rosatom in the People's Republic of Bangladesh.

The personnel of the NPP has started a large-scale test program.

On December 18, the first stage of operation commenced for bringing the reactor plant to the rated parameters. During this stage, the operability of equipment and mechanisms will be tested, in particular, the reactor coolant pumps (RPC) will be launched and tested for the first time.

The result of the program will be the testing of the reactor plant at the rated parameters without nuclear fuel. The program must confirm the compliance of the equipment with all the design parameters. After all the tests, the Unit will be ready for the start-up operations.

Commissioning of Rooppur NPP will ensure supply of environmentally friendly and safe energy providing for more than 10 % of the total energy consumption in the Republic of Bangladesh, which has an acute shortage of electrical power.

"We have entered the final straight in terms of preparation of Rooppur NPP Unit 1 for the physical start-up. This is an important stage, under which we must carry out a large scope of works and tests to prove the operability of the process systems in all the operating modes," pointed out Andrey Petrov, First Deputy Director General for Nuclear Energy of State Atomic Energy Corporation Rosatom, President of ASE JSC.

"We fulfill all our obligations and guarantee the reliability and safety of our technologies. The first nuclear power plant in Bangladesh will support the country's economy and will work for the benefit of its future generations."

Topics: Asia, Bangladesh


Other news:

Turbine installation completed at Unit 1 of Akkuyu NPP

The Akkuyu NPP turbine-generating unit consists of a combined high- and medium-pressure module, two low-pressure modules, and a generator.

Alexey Likhachev attended the launching ceremony of Chukotka nuclear icebreaker

After the launch, construction of Chukotka will proceed in the water.

WANO appoints Jose Gago as its new Chair

Effective on 1 March 2025.


Hero of the day

Reactor pressure vessel of Xudapu NPP Unit 4 has been installed in design position

Reactor pressure vessel of Xudapu NPP Unit 4 has been installed in design position

VVER-1200 reactor is a cylindrical vessel with an elliptical bottom, inside which there is the core and the internals. The length of the equipment is 13 meters, the diameter is 4.5 meters, and the weight is 320 tons.



INTERVIEW

Rosatom

Rosatom
Pietro Barabaschi held a meeting with the management of the Institute and saw around the facilities for high-tech components manufacturing of the future plant.


OPINION

CNNC

CNNC
the 400-ton toroidal field coil TF08 of the ITER was successfully hoisted onto the sub-assembly of the Vacuum Vessel Module 1, marking another milestone in the sector module sub-assembly (SMSA).


Search: